Definition of DRI : Detection, Recognition, Identification ranges
The question the most frequently asked to thermal imager manufacturers is certainly: how far can the IR camera detect a target? It is indeed a good criterion to qualify one sensor from another considering the final application. And the answer given to this question will probably include the âDRI rangesâ expression.
DRI stands for Detection, Recognition and Identification. DRI ranges, expressed in km (or miles), can be found in the specification table of infrared camera brochures. In order to select the right sensor meeting the application requirements, these DRI ranges have to be, first, perfectly defined, but also assessed with regards to globally adopted industrial standards.
John Johnson, a scientist from the Army Night Vision Laboratory, was a pioneer in 1958, conducting experiments to test observersâ ability to identify targets through analog sensors. The terms âDetectionâ, âRecognitionâ and âIdentificationâ were defined as follow:
- Detection: ability to distinguish an object from the background
- Recognition: ability to classify the object class (animal, human, vehicle, boat â¦)
- Identification: ability to describe the object in details (a man with a hat, a deer, a Jeep â¦)
The following pictures illustrate these definitions:
Left image: Detection â At several kms, 2 targets are detected out of the background
Center image: Recognition - a human is walking along the fence
Right image: Identification â 2 males with trousers and jackets are identified â one is smoking.
The Johnson criteria
Johnson defined thresholds, known as the Johnson criteria, as the minimum number of line pairs to detect, recognize or identify targets captured by scene imagers. The DRI lower limits, according to the Johnson criteria are typically in the following range:
- Detection limit: [0.75 / 1] lp
- Recognition limit: [3/4] lp
- Identification limit: [6/8] lp
A line pair (lp) is defined as one white line adjacent to a black line.
The thermal camera characteristics influencing detection range
With Johnson criteria in mind, it is easy to understand that the spatial resolution of a camera is an important parameter determining the quality of the security system. The spatial resolution: is the cameraâs ability to capture very small details at great distances. It is closely related to the number of camera pixels. Clearly, the more pixels there are, the better the spatial resolution will be and the greater the detection range will be.
However, the thermal sensitivity has also a high impact on detection performance. The thermal sensitivity is the ability to distinguish very small differences in temperature. The âcooledâ IR cameras offer better thermal sensitivity than âuncooledâ IR cameras. For the same number of pixels, the image of a âcooledâ thermal camera is of better quality (i.e. less ânoisyâ) than an âuncooledâ cameraâs image.
Left: image from a thermal imager with poor thermal sensitivity
Right: image from a cooled thermal camera with high thermal sensitivity
Another important characteristic of an infrared camera is the field of view (FOV). A large panoramic FOV is necessary in order to enhance the probability to detect a single event into a complete 360-degree scene. See in the picture below the image captured by a thermal sensor with a wide panoramic horizontal FOV, and, in green in the center, the area screened by a PTZ camera zoomed to a 2Â° FOV. It is clear that this PTZ camera has no chance at all to detect any event in this scenery.
NATO STANAG 4347 standard
So, the Johnson criteria is not sufficient to set up reliable, repeatable, specification table, as several factors influence the performance ranges: the field of view, the spatial resolution and thermal sensitivity of the infrared camera, the spectral band of detection, the shape and camouflage of the target, the experience of the operator ...
In order to compare the performance of systems from different manufacturers, it is necessary to establish a common test frame, listing the conditions influencing the DRI range values. STANAG 4347 standards, developed by NATO, is widely adopted in the thermal imaging industry. This standard defines the target parameters (resulting from size, shape, temperature, material properties, emissivityâ¦) and the conditions of use (resulting from ambient temperature, type of background sceneâ¦) to take into account in the MRTD (Minimum resolvable temperature difference) computation giving the values of the DRI ranges. See in the table below examples of target definition and the corresponding detection range of the SPYNEL-X, the IRST (Infrared Search&Track) with the best image quality and the longest detection range on the market:
How to select the adequate SPYNEL system?
HGH provides 15 different models of SPYNEL cameras, varying in DRI ranges, vertical field of views and detector types (cooled/uncooled, MWIR/LWIR). Depending on the application requirements (type of targets to be tracked, lower bounds of detection, recognition, identification) and on the critical site configuration (perimeter size, free zones, building location, obstacles), our engineers will guide you in finding the right SPYNEL model fitting your need. Do not hesitate to contact us for more information.